Hey Gem Tech, I need a wrench to fit Multi Mount threaded end cap, and I have a suggestion.
Hi Kel, looking for a Wrench to fit Multi Mount threaded end cap, as I keep getting the short threaded end cap stuck in the multi mount, and there is not much to get a hold of, also what would be really nice for the multi mount end caps is two holes on both sides of the cap and a wrench that can be put on an extension so I can also remove the threaded cap when it gets stuck on the barrel threads way down inside my 9mm AR free float tube, as for the most part the cap stays on the thread and not in the suppressor (in this case), you know its a real pain to disasemble a free float upper just to remove the thread adapter so I can shoot with a long flash hider unsuppressed.
You might be better off with our longer, grip-patterned fixed threadmount. That's got plenty of area to grab onto, plus that setup is a little quieter as an added bonus.
two problems with that, first they are 1/2-36 which you don't list in the extended version and secondly they still sit 3.5 inches down the free float tube. I guess i'll have to find a two pin wrench (unless you make one) that fits the two holes you already put in the short caps, and drill two more on the inside of the cap and make a wrench to fit.