AR15.Com Archives
 NEW EOTech XPS3 models at DSG Arms
DSGArms  [Industry Partner]
10/1/2009 11:54:54 AM
Check out EOTechs at DSG Arms

Models include;


NEW! EOTech Model XPS3-1 w/ Single 1MOA Dot Reticle $559.55 + shipping (LINK)



Shortest model sight yet! This sight is smaller than the former N-cell battery sight (511/551) and runs on a single 123 battery. It also has a longer battery life than the N-cell style sights. Smaller,lighter and always fast with three reticle options. With the new single battery configuration, the XPS allows more rail space than ever, leaving more room for rear iron sights or NV mount.

Single transverse 123 battery to reduce sight length
Shortened base only requires at most 2 3/4 inch of rail space compared to the 4 inch N battery sights
Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap; better sealing is achieved
Battery compartment is now separated from the base to allow it to hover over the delta ring of the rifle
Average battery life at brightness level 12 is roughly 500-600 hours, 3X battery life of N cell sights
Three reticle options: 0- 65MOA circle with 1 MOA aiming dot, 1-single 1MOA aiming dot, 2-65MOA circle with two 1MOA aiming dots
Available in Night Vision (XPS3) and non- Night Vision (XPS2) versions. The numbers reflect the number of the buttons on the back of the sight.



EOTech Model 553-A65 Holographic Sight w/ A.R.M.S mount - TAN (also in black) $649 + shipping (LINK)



EOTech WHS SU-231/PEQ (M553) Night Vision Adaptable - TAN:

•Night Vision Compatible
•Require 2 x CR123 Lithium batteries
•Battery Life is about 1100 continuous hours at nominal setting 12
•There are 30 brightness settings with scrolling feature (10 brightness settings for Night Vision use)
•Auto Battery Check Indicator: Flashing reticle upon start-up
•Two options of auto shut-down, either HOLO Sight can shut down at 8 hrs or after 4 hrs
•Dual quick-release throw levers for instant attachment.
•Powered by two 123 Lithium batteries, allowing cross application with other electronic gear.
•7mm (1/4") raised base to provide an operator a consistent cheek weld with all other standardized optics.
•66 (2ATM) feet water submersibility.
•Battery cap tether to avoid loss in the field


EOtech Model 517.A65 Holographic Sight $429 + shipping (LINK)



EOtech Model 517.A65 Holographic Sight

The new 517.A65 has been developed to optimize the functionality of the HWS. The buttons have been moved from the back to the left side for instant access, allowing a magnifier or a back up iron sight to fit closely to the HWS body. This new button position allows the user to operate the HWS function switches easier than ever before. Additionally, a portion of the front base has been raised to allow the sight to fit over standard hand guards found on many M-4 or M-16 style weapons

•Buttons on left side to work specifically with magnifiers
•AA Battery model (supports Lithium or Alkaline)
•Standard A65 image (65 MOA ring/1 MOA dot reticle)


EOtech Model 516.A65 Holographic Sight $455 + shipping (LINK)



EOtech Model 516.A65 Holographic Sight

•Buttons on left side of sight (not in back) to work specifically with magnifiers
•CR123 Lithium batteries; model with 65 MOA ring/1 MOA dot reticle
•Raised 7mm base with knurled cross bolt
•Fits to standard 1" Weaver dovetail/Picatinny rail
•Optics: Transmission holography - parallax free
•Magnification: 1x
•Eye Relief: Unlimited
•Length/Width/Height: 5.1\"x2.1\"x2.8\" (130x53x71 mm)
•Weight: 11.9 oz (372 grams)
•Temperature: -40 to 150 F
•Waterproof: Submersible to 33 ft depth
•Sealing: Fogproof internal optics
•Color/Finish: Non reflective black with hard coat finish
•Adjustment (per click): 0.5 MOA (1/2\" at 100 yds)
•Adjustment Range: +/- 40 MOA travel
•Mount: 1\" Picatinny (MIL-STD-1913) rail
•Return to Zero: Repeatable to 1 MOA after re-mounting
Heads-Up-Display Window
•Optical Surfaces: Anti-glare coating
•Window Dimensions: 1.20\" x 0.85\" (30 x 23mm)
•Front Window Material: 1/8\" solid glass
•Rear Window Material: Shatter resistant laminate (3/16\" thick)
•Field of View (100 yds): 30 yds (28m) at a 4\" eye relief
•Standard Reticle: A65/1
Electrical
•Brightness Adjustment Range: 110,000:1 brightest to lowest
•Night Vision Brightness Range: NA
•Function Button Location: Left side near the rear of sight
•Power Source: 2x 3.0V Lithium 123 batteries
•Battery Life: 1,000 continuous hours (lithium) at nominal setting 12
•Brightness Settings: 30 settings with scrolling feature
•Auto Battery Check Indicator: Flashing reticle upon start-up
•Auto Shut-down: At 8 hrs- programmable to 4 hrs


Eotech 3X Magnifier w/ Flip to Side A.R.M.S. Throw Lever Mount **NEWEST GENERATION 9/28/2009** $531 + shipping (LINK)



EOTech Holographic Sight HWS 3X Magnifier is an affordable magnified solution that will transition a fielded HWS into a lethal medium range optic. Superior light transmission and a large field of view helps this Eotech 3 x Magnifier put the competition to shame. This rugged, streamlined optic offers split-second transitioning from CQB to medium range targeting.

- Magnification Fixed: 3.25X
- Eye Relief: 1.65” (42mm)
- Field of View: 6 degrees
- Length: 4.3” (110mm)
- Weight: 6.5oz (184 grams)
- Temperature: -20° to 140° F
- Waterproof: 33 ft.
- Sealing: Fogproof internal optics
- Color/Finish: Non-reflective black with hard coat finish
- Mount: 34mm ring with integrated dovetail adapter for use with quick release mount

Specification of L-3 EOTech FTS Mount

- Length: 1.6” (40.6mm)
- Height: 1.64” (41.7mm) Clears common low profile flip up rear iron sights
- Weight: 4.5oz (128 grams)
- Color/Finish: Non-reflective black with hard coat finish
- Flip Orientation: Ambidextrous mount to allow left or right flip
- Rail Interface: Fixed Picatinny with single mounting bolt.
- Magnifier Interface: Retained by ARMS® throw
- Optical Axis Adjustment: Horizontal and vertical adjustments within mount



Other EOTech models at DSG Arms include;

512.A65
552.A65
552.XR500
552.XR308
555.A65
555.USMC
557.AR223
XPS3-2


Don't forget to visit the DSG Industry Forum for the ARFcom discount and many other great topics

For questions and special ARFcom pricing call or e-mail Charlie at 817-563-5661 ext 233

OR

Charlie@dsgarms.com


Thank you for your orders

www.dsgarms.com