Archived Posts » 59,859,448
2 drums, 10/22, neither work
2/4/2011 2:44:10 PM
Every three or four rounds they both do this.
And this is on a semi auto (haven't bothered running it on the Norrell yet, no point).
Any ideas?
And this is on a semi auto (haven't bothered running it on the Norrell yet, no point).
Any ideas?
2/4/2011 2:53:15 PM
My 10/22 will ONLY feed properly from the factory mags.
I tried a few aftermarket mags before giving up on all of them.
Of course, mine is a target rifle for punching paper, so 10rds per mag is fine:
I tried a few aftermarket mags before giving up on all of them.
Of course, mine is a target rifle for punching paper, so 10rds per mag is fine:
2/5/2011 10:54:58 AM
Originally Posted By parabellum_9x19:
My 10/22 will ONLY feed properly from the factory mags.
I tried a few aftermarket mags before giving up on all of them.
Of course, mine is a target rifle for punching paper, so 10rds per mag is fine:
My 10/22 will ONLY feed properly from the factory mags.
I tried a few aftermarket mags before giving up on all of them.
Of course, mine is a target rifle for punching paper, so 10rds per mag is fine:
If you ever are interested in aftermarket, try some of the Butler Creek steel lips 25rd magazines. Those have always worked good for me. Yeah, 10rds goes pretty fast through a Norrell, heck even the 25rders do also. Was really hopeful that these drums would work. I got an email from BD, said to file down part of the feed block on the left side, might be dragging the bolt. Not sure that will help, but will give it a shot.
Atleast they do answer emails
2/5/2011 11:48:47 AM
Can you feel resistance when you cycle the bolt with the mag unloaded and are these recently purchased?
2/6/2011 1:43:51 AM
The first one I bought had feeding issues. I sent it back to the factory and the replacement has worked well.
2/16/2011 6:10:53 PM
Update:
Back of one of the magazines was pushing up on the factory ejector. Filed it down and that helped. Took a round file to the feed throat, smoothed it off, and now I am down to 2 to 3 jams every magazine (far better than the every 3 shots).
But now here is the fun part.
Been emailing BD and they said if I can't get em to work, feel free to send them back and they will replace them. How awesome is that.
While I am not yet 100% certain on these magazines yet, I have to say the company sure is 100%.
Will let you know as this progresses.
Again, great customer service.
David
Back of one of the magazines was pushing up on the factory ejector. Filed it down and that helped. Took a round file to the feed throat, smoothed it off, and now I am down to 2 to 3 jams every magazine (far better than the every 3 shots).
But now here is the fun part.
Been emailing BD and they said if I can't get em to work, feel free to send them back and they will replace them. How awesome is that.
While I am not yet 100% certain on these magazines yet, I have to say the company sure is 100%.
Will let you know as this progresses.
Again, great customer service.
David
3/1/2011 9:12:45 PM
I try to help here on the BDM Forum when I can but had a setback a few weeks ago when
my Mother had a stroke. Kevin, BDM is somewhat out of touch for whatever reason but the
company is as always Superb at Customer Service...
Dave / Spec
my Mother had a stroke. Kevin, BDM is somewhat out of touch for whatever reason but the
company is as always Superb at Customer Service...
Dave / Spec
