Archived Posts » 59,821,464
remove colt stock
5/29/2012 8:35:57 AM
I am trying to remove my colt rogers super stock to install a single point sling attachment. I have tried lifting the depress lever and sliding the stock back but it stops at the last position. I recall reading apost but am having no luck with the search function. what am i doing wrong?
5/29/2012 8:42:59 AM
5/29/2012 8:45:14 AM
pull the front of the lever down all the way and slide it to the rear.
5/29/2012 8:45:55 AM
Look for the cross pin that is slotted through the pin that goes up and down. Use a tool (I used a flat head screw driver) to pull it down. I think I placed the muzzle on the ground and pinched it with my shoes and then sitting in a chair, pinned the receiver between my knees, pulled the cross pin down, and slid up. It took a few tries. Might want to try having a friend hold the rifle while you pull. Always do this stuff in a safe manner
5/29/2012 9:31:43 AM
Originally Posted By Will816:
Look for the cross pin that is slotted through the pin that goes up and down. Use a tool (I used a flat head screw driver) to pull it down. I think I placed the muzzle on the ground and pinched it with my shoes and then sitting in a chair, pinned the receiver between my knees, pulled the cross pin down, and slid up. It took a few tries. Might want to try having a friend hold the rifle while you pull. Always do this stuff in a safe manner
Look for the cross pin that is slotted through the pin that goes up and down. Use a tool (I used a flat head screw driver) to pull it down. I think I placed the muzzle on the ground and pinched it with my shoes and then sitting in a chair, pinned the receiver between my knees, pulled the cross pin down, and slid up. It took a few tries. Might want to try having a friend hold the rifle while you pull. Always do this stuff in a safe manner
this too...i forget we have elderly, weak women, and some children on this site.
5/29/2012 11:00:57 AM
Topic Moved
