Bulgarian (Single Stack) AK-47 7.62x39 #AKAGUN SSR 85C-01 From centerfiresystems.com

I am interested in picking up a Bulgarian single stack http://www.centerfiresystems.com/akagunssr85c-01.aspx
Would somebody post a picture of a single stack mag well and a double stack mag well so I can determine what needs to be dremeled out?

Thanks

I opened one up a few months ago. Its exactly the same as a WASR. Just be careful and not grind the rails in the magwell down too far, or you will have major mag wobble. The dimples on the bulgy dont hold the mag. I posted pics on here, but cant seem to find them at the momment.

Try using a double stack mag as a template.

Get a double stack mag & a dial caliper like this.
http://www.harborfreight.com/6-inch-fractional-dial-caliper-92437.html
Dremel it out keeping it equal on both sides & cut no more than about .005 to .010 larger than the width of the mag.
Measure often!

dont use a tapco plastic mag, use steel mags. the tapcos are alot thicker, this may be why centurys are so sloppy to fit the tapcos

Copyright © 1996 - 2013 :: AR15.Com LLC :: All Rights Reserved.
Any use of this content without express written consent is prohibited.