Archived Posts » 59,757,950
Pulled Rim off Cartridge in PSL Chamber
6/8/2011 9:40:34 PM
So the extractor pulled a slice of rim off of the casing in my PSL's chamber. The isn't enough sticking out to grab it with pliers and there wasn't a full separation of the base from the neck to get a shell extractor in. How do I get it out? I tried pounding it from the other side and of course that went nowhere...
Thanks,
Thanks,
6/9/2011 12:27:54 AM
wow, weird one....so the base isn't separated? and you used a cleaning rod and tapped it with a brass hammer from the bore end? if its not letting go, spray a penetrating oil/libricant down the bore and let it sit for a while...then tap again with a cleaning rod......
6/9/2011 12:29:38 AM
Originally Posted By mwc:
wow, weird one....so the base isn't separated? and you used a cleaning rod and tapped it with a brass hammer from the bore end? if its not letting go, spray a penetrating oil/libricant down the bore and let it sit for a while...then tap again with a cleaning rod......
wow, weird one....so the base isn't separated? and you used a cleaning rod and tapped it with a brass hammer from the bore end? if its not letting go, spray a penetrating oil/libricant down the bore and let it sit for a while...then tap again with a cleaning rod......
THIS. Hope you can get that bad sumbich out; broken casings are PITA.
6/9/2011 8:33:12 PM
It's soaking in oil now. Maybe I'll try tapping it a little harder. My brass gets little splits in it sometimes so I wonder if I got a weak lot of ammo...
6/9/2011 9:30:24 PM
use a punch rod bang it out
6/18/2011 9:23:35 PM
Stuck case puller...probably a 308 one if you can get it in.
6/19/2011 9:57:26 AM
I take a length of .22 caliber brass cleaning-rod..like maybe three sections screwed together...and slide it down the bore fast, releasing it to slam into the empty case. generally knocks it right out..
