Archived Posts » 60,595,333
I OOPSED my psl
9/17/2011 10:25:15 PM
i made a mistake trying to fit a different gas tube housing on my psl. i broke off the locking lever off. anyone know where i can buy a replacement? thanks ken
9/17/2011 10:58:10 PM
K-var
9/17/2011 11:12:08 PM
no luck i just looked there. but thanks
9/18/2011 2:00:43 AM
You probably know this now, but do not force the lever.
Sometimes you have to wiggle the gas tube assembly around to get it to line up properly and clear the latch mechanism; the correct position is not always jammed down as hard as possible.
Sometimes you have to wiggle the gas tube assembly around to get it to line up properly and clear the latch mechanism; the correct position is not always jammed down as hard as possible.
9/18/2011 9:32:47 AM
i'm usually smarter than that. but was tring to fit my rhineland dragunov foreend
9/19/2011 6:55:26 PM
You may have to get it TIG welded if you can't find one. I had to "fit" my new "used" tube as I was not going to cut up the matching one.
Will a standard AK one work?
Will a standard AK one work?
9/19/2011 8:10:58 PM
im not sure if an ak one will work.
9/20/2011 1:33:39 AM
Give Tennessee Guns a call to see if they have one: http://www.tnguns.com/shop/index.php?main_page=index&cPath=6_34
9/20/2011 6:39:02 AM
Originally Posted By dragunov:
Give Tennessee Guns a call to see if they have one: http://www.tnguns.com/shop/index.php?main_page=index&cPath=6_34
Give Tennessee Guns a call to see if they have one: http://www.tnguns.com/shop/index.php?main_page=index&cPath=6_34
TGI is a good place to look. They carry a lot of PSL parts.
9/20/2011 5:51:16 PM
ok thanks i will give them a try
9/20/2011 11:09:37 PM
try centerfire systems or numrich
9/30/2011 8:06:26 PM
Make sure you get the correct length one! I broke mine and ordered a standard AK replacement for a stamped receiver. Turns out that it's too short. Had to reorder the one for a milled receiver; it's fits correctly.
M590man
M590man
9/30/2011 11:23:50 PM
Originally Posted By M590man:
Make sure you get the correct length one! I broke mine and ordered a standard AK replacement for a stamped receiver. Turns out that it's too short. Had to reorder the one for a milled receiver; it's fits correctly.
M590man
Make sure you get the correct length one! I broke mine and ordered a standard AK replacement for a stamped receiver. Turns out that it's too short. Had to reorder the one for a milled receiver; it's fits correctly.
M590man
OOPS guess which one i ordered
where did you order yours from? thanks ken10/11/2011 6:53:30 PM
10/23/2011 9:16:38 PM
Originally Posted By chestnut101:
OOPS guess which one i ordered where did you order yours from? thanks ken
Originally Posted By M590man:
Make sure you get the correct length one! I broke mine and ordered a standard AK replacement for a stamped receiver. Turns out that it's too short. Had to reorder the one for a milled receiver; it's fits correctly.
M590man
Make sure you get the correct length one! I broke mine and ordered a standard AK replacement for a stamped receiver. Turns out that it's too short. Had to reorder the one for a milled receiver; it's fits correctly.
M590man
OOPS guess which one i ordered
where did you order yours from? thanks kenhttp://www.k-var.com/shop/product.php?productid=16996&cat=293&page=1
