Suppressor for PS90
I am SBR'ing my PS90.
Threaded barrel for a suppressor or a QD mount?
Can't find a P90 FH so I am think suppressor.
What suppressor for the PS90?
Are there suppressors for the PS90?
Silencerco confirmed the sparrow will handle a semi auto PS90. Must be someone on the board that has done it. Pics and a range report might push me to go this route as well.
Sparrow. Or any 5.56 suppressor since the 5.7x28 also uses a .224 bullet.
The Sparrow lends itself to 22 hosts since it is user serviceable and can be cleaned easily.
Posted Via AR15.Com Mobile
Look at the Huntertown Kestrel 22 also.
You can get a thread adapter and pretty much use most 5.56 suppressors. Gemtech sells a p90 flash hider that looks like the stock fn one but with tabs for the g5 suppressor. You could then use the same suppressor on an ar-15.
Ive got a PS90 with the Gemtech hider and a G5. The G5 is a little heavier than the rimfire based cans but I thought the performance was very good.
Honestly, I couldnt imagine shooting this gun suppressed without a QD mount. Fifty rounds is a long time to go without checking to see if your can is unthreading itself, and I really HATE to check tightness on it in the middle of a mag.
I use a AAC mini4 on mine. Wouldn't go any longer than that.
Gemtech has or had one that was specifically made for the PS90.