Archived Posts » 59,699,509
***SPF***FS: GG&G Scout Rail Optics Mount, $40 shipped CONUS.
2/19/2012 8:32:22 PM
FS: GG&G Scout Rail Optics Mount. Mounted with optics, so slight rub marks show, but never fielded. Otherwise like NEW.
$40 shipped CONUS (retail is $83 + shipping).
This GG&G optical mounting rail was designed to mount easily over the integral rails of the AR15/M16 flat top receiver and work in conjunction with any of our back up iron sights. As these rail mounting brackets raise the line of sight by 1/2 inch, they offer a proper cheek weld when optical devices are attached. In addition, they serve to protect the flat top receiver's integral rails from the damaging wear associated with lever type quick-release mounts, especially those without buffer pads.
The GG&G Scout Rail extends two inches beyond the upper reciever and cantilevers over the handuards including the M4 forearm. It was developed to accommodate long-eye-relief "scout"-type scopes and also Aimpoint red dot sights with night vision monoculars mounted to their rear.
Each scope mount rail is manufactured from billet 6061 T6 aluminum alloy, black Type III hard-coat anodized per Mil-Spec, and meet MIL-STD-1913. These rail mounting systems lock onto the flat top receiver by means of a full locking side bar and two round head socket head screws. This provides both a positive and perfectly aligned lock-up even on well-worn receiver rails.
Not looking for any trades at this time.
Best contact: abn369@att.net
I accept usps money orders for payment, not set up for PAYPAL.
Thanks for looking,
Mike
$40 shipped CONUS (retail is $83 + shipping).
This GG&G optical mounting rail was designed to mount easily over the integral rails of the AR15/M16 flat top receiver and work in conjunction with any of our back up iron sights. As these rail mounting brackets raise the line of sight by 1/2 inch, they offer a proper cheek weld when optical devices are attached. In addition, they serve to protect the flat top receiver's integral rails from the damaging wear associated with lever type quick-release mounts, especially those without buffer pads.
The GG&G Scout Rail extends two inches beyond the upper reciever and cantilevers over the handuards including the M4 forearm. It was developed to accommodate long-eye-relief "scout"-type scopes and also Aimpoint red dot sights with night vision monoculars mounted to their rear.
Each scope mount rail is manufactured from billet 6061 T6 aluminum alloy, black Type III hard-coat anodized per Mil-Spec, and meet MIL-STD-1913. These rail mounting systems lock onto the flat top receiver by means of a full locking side bar and two round head socket head screws. This provides both a positive and perfectly aligned lock-up even on well-worn receiver rails.
Not looking for any trades at this time.
Best contact: abn369@att.net
I accept usps money orders for payment, not set up for PAYPAL.
Thanks for looking,
Mike
2/23/2012 3:57:11 PM
I will take it for $40 shipped
E-mail sent
E-mail sent
