AR15.Com - Reloading

Virgin Lapua Brass To prep or not to prep

5/25/2013 1:30:33 PM

So far I've had good luck loading virgin lapua brass without doing any case prep, and never really thought about doing it because I've never had any issues and aside from the odd case mouth out of round. Does anyone else just load em ...

Linotype prices

5/25/2013 12:52:50 PM

I have a few hundred pounds of linotype bars and no longer cast bullets. How much can I get for it?

Sizing brass

5/25/2013 11:57:57 AM

I like to do my reloading in stages. Size all, Then sometime later prime all cases and store. Question i have is, will the brass relax so as to have less neck tension over time.

Lake City annealed brass

5/25/2013 2:56:16 AM

On Lake City annealed brass do you need to reanneal it? Is it a once annealed always annealed? Also for making Blackout brass from Lake City brass it is annealed all the way to the bottom of the new neck. Is this ok or should I anneal it a little ...

Reduced load for 7 62x54R

5/24/2013 11:03:27 PM

I just got the June issue of 'The American Rifleman' and on page 46 has a reduced load for the .308 Win. It was 8.0 grains of Hodgdon Clays + Hornady 168 gr A-Max = 908 fps, What I'd like to do is get a similar load in 7.62x54R but with a heavy ca...

Small rifle primers real world differences in the various brands

5/24/2013 10:11:13 PM

I have about 1400 CCI 41 primers and about 800 Rem 7-1/2 left in my pre panic stash. My Dad and I went in on 10,000 of the Wolf SRM primers Wideners had on sale a couple months back. My question is, how much variation have you seen in...

Made a tool head stand for the 1050

5/24/2013 10:05:13 PM

Looked and couldn't find a commercial version for holding the extra tool heads for the Dillon 1050, so me and my pops made them. What do you think? Oak base from stair treads, very stable.